Mehdi Sedighi; Majid Mohammadi
Abstract
Consistent with the US Environmental Protection Agency, heavy metals are classified as carcinogenic to humans. Their numerous agricultural, industrial, domestic, medical, and technical requirements have resulted in their widespread dissemination in the environment. This article examines a new green adsorbent ...
Read More
Consistent with the US Environmental Protection Agency, heavy metals are classified as carcinogenic to humans. Their numerous agricultural, industrial, domestic, medical, and technical requirements have resulted in their widespread dissemination in the environment. This article examines a new green adsorbent for the removal of two hazardous heavy metals, lead and mercury. The impact of contact time, pH, initial concentration, and temperature on the adsorption capacity of Pb2+ and Hg2+ were evaluated. Experimental data were analyzed by adsorption models. The equilibrium data were well adapted to the Langmuir adsorption model. The results show that the adsorption is homogeneous and localized in a monolayer. In addition, the maximum adsorption capacity was 277.78 mg/g for Pb2+ and 64.52 mg/g for Hg2+ from Langmuir isotherm. Thermodynamic data, including free energy (ΔG°), enthalpy (ΔH°), and entropy (ΔS°) variations were also considered. The important point is that the negative value of ΔG° signifies the spontaneity of the adsorption process of the heavy metals−NiO/ZSM-5 system.
Reza Tayebee; vahid Mazruy
Abstract
The limited adsorption capacity of natural clays is a crucial and economic issue which confined their applications in industry as cheap adsorbents to remove toxic contaminants from wastewaters. Here, the adsorption capacity of a natural nano bentonite was enhanced by a simple acid and thermal activation ...
Read More
The limited adsorption capacity of natural clays is a crucial and economic issue which confined their applications in industry as cheap adsorbents to remove toxic contaminants from wastewaters. Here, the adsorption capacity of a natural nano bentonite was enhanced by a simple acid and thermal activation and the manufactured nano-adsorbent was characterized by FESEM, BET, FT-IR, and XRD. Effects of pH, temperature, sorbent capacity, and the initial concentration of malachite green were examined. The isotherm behavior of the adsorption system was investigated by the Langmuir and Freundlich isotherm models. Also, the kinetic inspections demonstrated that the adsorption of malachite green matched with the pseudo-second-order kinetic and the obtained thermodynamic parameters H, S, and G showed that the adsorption of malachite green was a spontaneous and endothermic process. The results indicated that the acid-thermal activated nano bentonite, with an enhanced surface area of >220 m2/g, can be depleted as a powerful and low-cost adsorbent to expel malachite green from aqueous solutions.