Ashok V Borhade; Yogita R Shelke; Vivek D Bobade; Dipak R. Tope; Jyoti A. Agashe
Abstract
Water pollution is one of the serious main global concerns that affect humans and numerous people die due to various diseases caused by contaminated water because of the toxic and carcinogenic nature of dyes in effluents. It is essential to develop an efficient and effective method for wastewater ...
Read More
Water pollution is one of the serious main global concerns that affect humans and numerous people die due to various diseases caused by contaminated water because of the toxic and carcinogenic nature of dyes in effluents. It is essential to develop an efficient and effective method for wastewater treatment using a highly active and reusable catalyst. Herein we report heterogeneous catalyst MgZrO3@Fe2O3@ZnO nanoparticles by sol-gel approach. They were characterized by UV-visible diffused reflectance spectroscopy (UV-DRS), X-ray diffraction (XRD), Scanning electron microscopy (SEM), Energy dispersive x-ray analysis (EDAX), and High-resolution transmission electron microscopy (HRTEM) and selected area diffraction. This characterization confirmed the structure of MgZrO3@Fe2O3@ZnO and also confirmed excellent photocatalytic activity for the decolorization of Nigrosin dye under ambient conditions. The 96±0.5 % degradation was observed within 60 min using 20 ppm Nigrosin dye solution with 0.2 g of MgZrO3@Fe2O3@ZnO core-shell nanoparticles. A mechanistic approach for photodegradation of dye was established by Liquid chromatography-mass spectrometry (LCMS) with the identification of numerous smaller fragment molecule
Jyoti A. Agashe; Dipak R. Tope; sachin S Kushare; Ashok V Borhade
Abstract
Nanocrystalline UV light induced composite CeO2:SiO2 with high surface area and low band gap energy were prepared in order to assess its photocatalytic degradation capacity of target pollutant (mixture of dyes). The complete mineralization of target dye pollutants (30 ppm) occurred within 150 min. when ...
Read More
Nanocrystalline UV light induced composite CeO2:SiO2 with high surface area and low band gap energy were prepared in order to assess its photocatalytic degradation capacity of target pollutant (mixture of dyes). The complete mineralization of target dye pollutants (30 ppm) occurred within 150 min. when CeO2:SiO2 catalyst with optimum loading 0.4 g was used. Overall, the present system is economical, reproducible and highly efficient. Further the comparative study on photocatalytic efficiency of SiO2 and CeO2 was compared with composite CeO2:SiO2. The effect of various operational parameters used in degradation like concentration of dye, amount of photocatalyst and various catalyst has been studied on the rate of reaction. The recyclability of the photocatalyst, CeO2:SiO2 was performed up to four runs. The photodegradation of waste water pollutants was occurred nearly 96 % using CeO2:SiO2 nanoparticles. The removal of waste water pollutants was confirmed by UV spectrophotometer by diminishing the absorbance to zero within 120 min using CeO2:SiO2 nanoparticles. The synthesized catalyst was characterized by various analytical investigative techniques like UV-DRS, FTIR, XRD, SEM, TEM and BET.
Ashok V. Borhade; Dipak R. Tope; Jyoti A. Agashe; Sachin S. Kushare
Abstract
In the present work, the sol-gel derived powders of the chemical form FeCr2O4@ZnO@MgO Core-shell, has been synthesized and used as a photocatalyst. The synthesized core-shell nanoparticles characterized by various analytical techniques including FTIR, XRD, SEM-EDAX, and HR-TEM-SEAD. The successful performance ...
Read More
In the present work, the sol-gel derived powders of the chemical form FeCr2O4@ZnO@MgO Core-shell, has been synthesized and used as a photocatalyst. The synthesized core-shell nanoparticles characterized by various analytical techniques including FTIR, XRD, SEM-EDAX, and HR-TEM-SEAD. The successful performance of synthesized core-shell photocatalyst FeCr2O4@ZnO@MgO has been also demonstrated for the complete mineralization of Orange G dye. The effect of various operational parameters used in dye degradation such as concentration of dye, light intensity, amount of photocatalyst, effect of light and effect of electrolyte has been studied on the rate of reaction. TEM analysis clearly shows two layers of ZnO and MgO on FeCr2O4. The highest degradation rate was found with concentration of Orange G dye 10 ppm, 0.8 g of FeCr2O4@ZnO@MgO and time 50 min. The recyclability of the photocatalyst, FeCr2O4@ZnO@MgO was performed up to four runs. The degradation mechanism has been established by using LC-MS analysis and it was used to track the numerous intermediate products formed during the course of Orange G dye degradation.